Powerbloc 50 / 80

Powerbloc 50 / 80
1 - Pulley removal from the vehicle
2 - Assembling the sliding flange
3 - Final assembly

<< previous   

Final assembly

Assemble the Blocks as per the Diagram.



 
So as not to deteriorate the item (12), apply a Torque Value of 13 to 35 in.-lbs. (1.5 to 4 Nm).



Mount the Cap over the Hexagonal Section of the Shaft.





After having mounted the Sliding Flange onto the Fixed Flange, insert the three Blocks with the curved sides pointing upwards.

 


  In order to obtain maximum  pulley efficiency, it is desirable to verify that the three Blocks be assembled with an equal number of Weights.

  



While preventing Pulley Rotation, apply a Torque Value of 88 to 100 ft.-lbs. (120 to 135 N-m) with a Torque Wrench.

 PDF Format


<< previous