LP3

LP3
1 - Disassembling the Driven Pulley
2 - Sliding Flange Maintenance
3 - Reassembling the Driven Pulley

<< previous   

Sliding Flange Maintenance

If the Cam Shoes are worn down to about 1 mm before making contact with the Aluminum Flange, they must be replaced.





 



After removing the Screws with a No. 20 Torx Screwdriver, the Cam Shoes may be removed using a Flathead Screwdriver.




Mount the Cam Shoes using a Hammer.

Do not be too rough with the Hammer. You might damage the Cam Shoes.




Tighten the Screws using a No. 20 Torx Screwdriver.

Apply a Torque Value of 2.5 to 4.5 Nm

<< previous